Zinc oxide nanostructured platform for electrochemical detection of heavy metals

ZnO nanoparticles (ZnO-NP) were prepared by a facile precipitation technique using di-isopropyl amine as precipitating agent. The morpho-structure and porosity of the as-prepared nano-powder were investigated by FT-IR analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET analysis. By drop-casting, a composite film was deposited to obtain ZnO-NP-Nafion/GCE modified electrode. The modified electrode was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and square wave anodic stripping voltammetry (SWASV) for the detection of Pb²⁺, Cd²⁺, Cu²⁺, and Fe³⁺, and it was successfully applied for the detection of Pb²⁺ and Cu²⁺ in real water samples.     

超声波促进手性双酰基氧化膦的合成

以L-薄荷醇为原料,经3步反应制备得到中间体薄荷基二氯化膦.该中间体首先通过与超声波辐射制备的微米级钠粒反应形成薄荷基膦二钠盐,然后依次经过偶联及氧化反应合成了目标产物(-)-双(薄荷基甲酰基)薄荷基氧化膦(BMMPO),并经过1 H NMR、13 C NMR、31P NMR和元素分析进行了表征.     

Non‐Invasive Salivary Electrochemical Quantification of Paraquat Poisoning Using Boron Doped Diamond Electrode

The present work describes the first electrochemical method for quantifying paraquat herbicide poisoning in human saliva samples. Paraquat shows two couples of well‐defined peaks in aqueous solution using a boron doped diamond (BDD) electrode. By using square wave voltammetry (SWV) technique under optimum experimental conditions, a linear analytical curve was obtained for paraquat concentrations ranging from 0.800 to 167 µmol L^?1, with a detection limit of 70 nmol L^?1. This method was applied to quantify paraquat spikes in human saliva samples and in two different water samples (tap and river). The recovery values obtained ranged from 83.0 to 104 % and 99.1 to 105 %, respectively, which highlight the accuracy of the proposed method.     

Square‐Wave Voltammetry of Electroinactive Surfactants

Under the influence of previously published and some new theoretical results, potential‐ dependent adsorption and desorption of model electroinactive surfactants Triton X‐100 (T‐X‐100 or polyethylene glycol p‐(1,1,3,3‐tetramethylbutyl)‐phenyl ether) and sodium dodecyl sulfate (SDS) on the static mercury drop electrode (SMDE) were studied by square‐wave voltammetry (SWV). Although (according to the theory) the resulting current – potential curve should consist of two highly separated peaks, only desorption signal could be seen on each experimentally obtained voltammogram, most probably because of the limitations concerning the available potential range. Different properties of the recorded peak are in good agreement with the theory indicating that square‐wave voltammetry could be treated as a potential tool for tensammetric studies of electroinactive surface active substances.     

A Nitrite Electrochemical Sensor Based on Boron‐Doped Diamond Planar Electrochemical Microcells Modified with a Monolacunary Silicotungstate Polyoxoanion

A new boron doped diamond microcells (BDD) was modified, for rapid, selective and highly sensitive determination of nitrite, using a coating film of polyoxometalates (POMs), formed by cyclic voltammetry on the molecular p‐phenylenediamine (PPD) functionalized BDD. The scanning electron microscopy (SEM) technique was used to examine the morphology of (PPD/SiW₁₁) modified (BDD) electrode. It was found that (SiW₁₁) layer was uniformly formed on the electrode surface. It was observed that (BDD/PPD/SiW₁₁) showed excellent electrocatalytic activities towards nitrite ion. Under the selected conditions, the anodic peak maximum at ?0.6 V was linear versus nitrite concentration in the 40 µM–4 mM range, and the detection limit obtained was 20 µM. The newly developed electrode has been successfully applied to the determination of nitrite content in real river water samples.     

An anion effect on the separation of AgI-containing melts using sound waves

Sound velocities in molten ((LiF + AgI)) and ((LiBr + AgI)) mixtures have been measured to investigate the relationship between the sound velocity and the temperature and the role of the anion in the (liquid + liquid) phase transition. Our results show that the ((LiBr + AgI)) system is biphasic between the melting point and T = 984 K and becomes monophasic above this temperature. We show that the upper consolute critical temperature for the AgI-containing melts increases with decreasing anion size in the series F⁻ > Cl⁻ > Br⁻. The ((LiF + AgI)) melt remains biphasic at all temperatures investigated up to T = 1218 K. The temperature coefficients for the sound velocities in the upper and lower phases of the ((LiBr + AgI)) system have opposite signs because of the superposition of the temperature and composition factors. The difference between the magnitudes of the velocities for the coexisting phases decreases exponentially with increasing temperature and is described by a critical exponent of 0.85 for the ((LiBr + AgI)) melt near the critical temperature. This value is 15% less than that found for alkali halide melts, in which long-range Coulomb forces between ions prevail. This difference may result from the fact that silver halides are intermediate between the typical ionic salts and the fully covalently bonded ones.     

Dynamic polarizability of two‐electron ions under Debye screening

The effect of plasma screening on the dynamic dipole polarizability (DPP) of two‐electron ions Be²⁺, B³⁺, and C⁴⁺ has been investigated using highly correlated exponential wave functions within the framework of pseudostate summation technique and Debye screening concept. Plasma‐screening effect on the oscillator strengths (OS) of the ultraviolet and visible series has also been investigated for the systems Li⁺, Be²⁺, B³⁺, C⁴⁺. The DPP are reported as functions of screening parameters. The OS for S‐P transitions are also reported for various screening parameters. The OS and dynamic polarizability show interesting behavior with increasing screening strength and nuclear charge. © 2015 Wiley Periodicals, Inc.     

Two‐dimensional reactive scattering with transmitted quantum trajectories

A simple and easy‐to‐implement method is presented for the study of time‐dependent reaction dynamics by propagating an ensemble of transmitted quantum trajectories. During the trajectory evolution, reflected trajectories are gradually removed and all the remaining trajectories represent the transmitted subensemble. The removal process of reflected trajectories avoids numerical instabilities arising from node formation in the reactant region, and allows stable long‐time propagation of transmitted trajectories. This method is applied to a two‐dimensional model chemical reaction. Excellent computational results are obtained for the time‐dependent reaction probabilities evaluated by the time integration of the probability flux. © 2014 Wiley Periodicals, Inc.